Tools and Equipment

Polyflex Tools
         
   

Polyflex Pneumatic Joiner

  • Lightweight aluminum joiner
  • Portable & compact
  • Easy to use
  • Available in 15”, 24”, 36”, & 48”
 
     
   

Leister Kit

 Includes:   Hot Air Gun 7mm & 9mm Nozzle Spatula (knife to trim weld)

  • Variable temperature adjustment
  • Adjustable air flow
  • 110 Volt
 
         
   

Hand Joiner and Heat Tool

Hand Joiner for belting up to 4”
 Heat Tool for belting up to 4”

  • Join narrow width Polyflex belting
  • Makes easy, quick, strong belt weld
  • 110 Volt Heat Tool
 
     
Rounthane/Veethane Tools
         
   

Model 75
Rounthane Joiner, 110 Volt

Includes:  

  • Pliers
  • #90-1 Handle & Heat Iron 110 Volt
  • #90-2 Paddle
  • Use for belt diameters from 1/8” through 1/2” (model 100 for 9/16”, 5/8” & 3/4”)
 
     
   

Model 85
Veethane Joiner, 110 Volt

 Includes:  

  • Pliers
  • #90-1 Handle & Heat Iron 110 Volt
  • #90-2 Paddle
  • For use with 3L through C Sections
 
         
   

Model 90
Heat Iron Complete, 110 Volt

Includes:

  • #90-1 Heat Iron 110 Volt
  • #90-2 Paddle
 
     
PORTABLE NYCOR PRESSES
   

Model GK-6 for belting up to 6” wide
Model GK-8
for belting up to 8” wide

  • Lightweight cast aluminum construction
  • Hold-down clamps make it easy to position belting in press
  • Electrically heated top platen (115 VAC/DC)
  • An additional cold top platen to speed splice cooling
 
     
   

Model HP32 Hand Press
for belting up to 3" wide, 7/64 thick
Model HP100 Hand Press
for belting up to 4" wide, 7/64 thick

  • Lightweight and portable
  • Adjustable air flow
  • 110 Volt belt
 
   
REINFORCED ROUND BELTING TOOLS
         
   

Polyester Cord Can Cable Joiner Kit

Includes:  

  • Heat Unit with Stem Thermometer
  • 3/8" Mold with Wing Nuts
  • Dry Film Mold Release
  • #90 Heat Iron with Tip, Paddle and Cover
  • Tip with Paddle
  • 90° Cutter
  • 12 Sleeves
  • Water Trough
  • Instructions
  • Tool Box
 
     
   

Steel Cord Can Cable Joiner Kit

 Includes:  

  • Heat Unit with Stem Thermometer
  • 3/8" Mold with Wing Nuts
  • Dry Film Mold Release
  • Cable Cutter
  • 90° Cutter
  • Crimping Tool
  • 12 Sleeves
  • 25 Crimps
  • Water Trough
  • Instructions
  • Tool Box
 
         
   

QM 2.0 Press

 Includes:  

  • Heating Pliers
  • Timer
  • Cooling Pliers
  • Cutter
  • Guide Rails
  • Clamps
 
   
NYCOR ABRASIVE BEVELERS
         
   

Model B250
for belting up to 25" wide

  • Motorized
  • Adjustable for varying lap lengths
  • Sanding belt easily replaced
  • Can be modified for belt widths beyond 25"
  • Moveable bed/stationary sander
 
     
     

Model B35
for belting up to 3 1/2" wide and 7/64" thick
Model B60
for belting up to 6" wide and 1/4" thick

  • Available with or without motor and drive
  • Lightweight and portable
  • Automatic setting for belt taper
  • Abrasive Paper easily replaced
 
home | about us | industries served | products | services | Woman Owned | news | faq’s | contact us | site map
Copyright 2003 Shingle Belting